SITE INDEX  
E N F O R C E M E N T   AND   C O M P L I A N C E
  SEARCH  
   

Click here for the Trade Guide

WTO: Information Technology Agreement

MINISTERIAL DECLARATION ON TRADE IN INFORMATION TECHNOLOGY PRODUCTS

SINGAPORE, 13 DECEMBER 1996

Ministers,

Representing the following Members of the World Trade Organization ("WTO"), and States or separate customs territories in the process of acceding to the WTO, which have agreed in Singapore on the expansion of world trade in information technology products and which account for well over 80 per cent of world trade in these products ("parties"):

Australia

Japan

Canada

Korea

Separate Customs Territory of Taiwan, Penghu Kinmen and Matsu

Moldova

Norway

European Communities

Singapore

Hong Kong

Switzerland

Iceland

Turkey

Indonesia

United States

Morocco

--------------------------------------------------------------------------------

View a List of Current Signatories (This is an offsite link to the WTO's Information Technology Agreement web site. This link is not in the original text of the agreement and is provided by TANC.)

--------------------------------------------------------------------------------

Considering the key role of trade in information technology products in the development of information industries and in the dynamic expansion of the world economy,

Recognizing the goals of raising standards of living and expanding the production of and trade in goods;

Desiring to achieve maximum freedom of world trade in information technology products;

Desiring to encourage the continued technological development of the information technology industry on a world-wide basis;

Mindful of the positive contribution information technology makes to global economic growth and welfare;

Having agreed to put into effect the results of these negotiations which involve concessions additional to those included in the Schedules attached to the Marrakesh Protocol to the General Agreement on Tariffs and Trade 1994, and

Recognizing that the results of these negotiations also involve some concessions offered in negotiations leading to the establishment of Schedules annexed to the Marrakesh Protocol,

Declare as follows:

1. Each party's trade regime should evolve in a manner that enhances market access opportunities for information technology products.

2. Pursuant to the modalities set forth in the Annex to this Declaration, each party shall bind and eliminate customs duties and other duties and charges of any kind, within the meaning of Article II:1(b) of the General Agreement on Tariffs and Trade 1994, with respect to the following:

(a) all products classified (or classifiable) with Harmonized System (1996) ("HS") headings listed in Attachment A to the Annex to this Declaration; and

(b) all products specified in Attachment B to the Annex to this Declaration, whether or not they are included in Attachment A;

through equal rate reductions of customs duties beginning in 1997 and concluding in 2000, recognizing that extended staging of reductions and, before implementation, expansion of product coverage may be necessary in limited circumstances.

3. Ministers express satisfaction about the large product coverage outlined in the Attachments to the Annex to this Declaration. They instruct their respective officials to make good faith efforts to finalize plurilateral technical discussions in Geneva on the basis of these modalities, and instruct these officials to complete this work by 31 January 1997, so as to ensure the implementation of this Declaration by the largest number of participants.

4. Ministers invite the Ministers of other Members of the WTO, and States or separate customs territories in the process of acceding to the WTO, to provide similar instructions to their respective officials, so that they may participate in the technical discussions referred to in paragraph 3 above and participate fully in the expansion of world trade in information technology products.

Annex: Modalities and Product Coverage

Attachment A: list of HS headings

Attachment B: list of products

ANNEX

Modalities and Product Coverage

Any Member of the World Trade Organization, or State or separate customs territory in the process of acceding to the WTO, may participate in the expansion of world trade in information technology products in accordance with the following modalities:

1. Each participant shall incorporate the measures described in paragraph 2 of the Declaration into its schedule to the General Agreement on Tariffs and Trade 1994, and, in addition, at either its own tariff line level or the Harmonized System (1996) ("HS") 6-digit level in either its official tariff or any other published versions of the tariff schedule, whichever is ordinarily used by importers and exporters. Each participant that is not a Member of the WTO shall implement these measures on an autonomous basis, pending completion of its WTO accession, and shall incorporate these measures into its WTO market access schedule for goods.

2. To this end, as early as possible and no later than 1 March 1997 each participant shall provide all other participants a document containing (a) the details concerning how the appropriate duty treatment will be provided in its WTO schedule of concessions, and (b) a list of the detailed HS headings involved for products specified in Attachment B. These documents will be reviewed and approved on a consensus basis and this review process shall be completed no later than 1 April 1997. As soon as this review process has been completed for any such document, that document shall be submitted as a modification to the Schedule of the participant concerned, in accordance with the Decision of 26 March 1980 on Procedures for Modification and Rectification of Schedules of Tariff Concessions (BISD 27S/25).

(a) The concessions to be proposed by each participant as modifications to its Schedule shall bind and eliminate all customs duties and other duties and charges of any kind on information technology products as follows:

(i) elimination of such customs duties shall take place through rate reductions in equal steps, except as may be otherwise agreed by the participants. Unless otherwise agreed by the participants, each participant shall bind all tariffs on items listed in the Attachments no later than 1 July 1997, and shall make the first such rate reduction effective no later than 1 July 1997, the second such rate reduction no later than 1 January 1998, and the third such rate reduction no later than 1 January 1999, and the elimination of customs duties shall be completed effective no later than 1 January 2000. The participants agree to encourage autonomous elimination of customs duties prior to these dates. The reduced rate should in each stage be rounded off to the first decimal; and

(ii) elimination of such other duties and charges of any kind, within the meaning of Article II:1(b) of the General Agreement, shall be completed by 1 July 1997, except as may be otherwise specified in the participant's document provided to other participants for review.

(b) The modifications to its Schedule to be proposed by a participant in order to implement its binding and elimination of customs duties on information technology products shall achieve this result:

(i) in the case of the HS headings listed in Attachment A, by creating, where appropriate, sub-divisions in its Schedule at the national tariff line level; and

(ii) in the case of the products specified in Attachment B, by attaching an annex to its Schedule including all products in Attachment B, which is to specify the detailed HS headings for those products at either the national tariff line level or the HS 6-digit level.

Each participant shall promptly modify its national tariff schedule to reflect the modifications it has proposed, as soon as they have entered into effect.

3. Participants shall meet periodically under the auspices of the Council on Trade in Goods to review the product coverage specified in the Attachments, with a view to agreeing, by consensus, whether in the light of technological developments, experience in applying the tariff concessions, or changes to the HS nomenclature, the Attachments should be modified to incorporate additional products, and to consult on non-tariff barriers to trade in information technology products. Such consultations shall be without prejudice to rights and obligations under the WTO Agreement.

4. Participants shall meet as soon as practicable and in any case no later than 1 April 1997 to review the state of acceptances received and to assess the conclusions to be drawn therefrom. Participants will implement the actions foreseen in the Declaration provided that participants representing approximately 90 per cent of world trade in information technology products have by then notified their acceptance, and provided that the staging has been agreed to the participants' satisfaction. In assessing whether to implement actions foreseen in the Declaration, if the percentage of world trade represented by participants falls somewhat short of 90 per cent of world trade in information technology products, participants may take into account the extent of the participation of States or separate customs territories representing for them the substantial bulk of their own trade in such products. At this meeting the participants will establish whether these criteria have been met.

5. Participants shall meet as often as necessary and no later than 30 September 1997 to consider any divergence among them in classifying information technology products, beginning with the products specified in Attachment B. Participants agree on the common objective of achieving, where appropriate, a common classification for these products within existing HS nomenclature, giving consideration to interpretations and rulings of the Customs Co-operation Council (also known as the World Customs Organization or "WCO"). In any instance in which a divergence in classification remains, participants will consider whether a joint suggestion could be made to the WCO with regard to updating existing HS nomenclature or resolving divergence in interpretation of the HS nomenclature.

6. The participants understand that Article XXIII of the General Agreement will address nullification or impairment of benefits accruing directly or indirectly to a WTO Member participant through the implementation of this Declaration as a result of the application by another WTO Member participant of any measure, whether or not that measure conflicts with the provisions of the General Agreement.

7. Each participant shall afford sympathetic consideration to any request for consultation from any other participant concerning the undertakings set out above. Such consultations shall be without prejudice to rights and obligations under the WTO Agreement.

8. Participants acting under the auspices of the Council for Trade in Goods shall inform other Members of the WTO and States or separate customs territories in the process of acceding to the WTO of these modalities and initiate consultations with a view to facilitate their participation in the expansion of trade in information technology products on the basis of the Declaration.

9. As used in these modalities, the term "participant" shall mean those Members of the WTO, or States or separate customs territories in the process of acceding to the WTO, that provide the document described in paragraph 2 no later than 1 March 1997.

10. This Annex shall be open for acceptance by all Members of the WTO and any State or any separate customs territory in the process of acceding to the WTO. Acceptances shall be notified in writing to the Director-General who shall communicate them to all participants.

There are two attachments to the Annex

Attachment A lists the HS Headings or parts thereof to be covered.

Attachment B lists specific products to be covered by the ITA wherever they are classified in the HS.

Attachment A, Section 1

 

HS96

 

HS description

 

3818

 

Chemical elements doped for use in electronics, in form of discs, wafers or similar forms; chemical compounds doped for use in electronics

 

8469

11

Word processing machines

 

8470

 

Calculating machines and pocket-size data recording, reproducing and displaying machines with a calculating function; accounting machines, postage franking machines, ticket-issuing machines and similar machines, incorporating a calculating devices; cash registers:

 

8470

10

Electronic calculators capable of operating without an external source of electric power and pocket size data recording, reproducing and displaying machines with calculating functions

 

8470

21

Other electronic calculating machines incorporating a printing device

 

8470

29

Other

 

8470

30

Other calculating machines

 

8470

40

Accounting machines

 

8470

50

Cash registers

 

8470

90

Other

 

8471

 

Automatic data processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included:

 

8471

10

Analogue or hybrid automatic data processing machines

 

8471

30

Portable digital automatic data processing machines, weighing no more than 10 kg, consisting of at least a central processing unit, a keyboard and a display

 

8471

41

Other digital automatic data processing machines comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined

 

8471

49

Other digital automatic data processing machines presented in the form of systems

 

8471

50

Digital processing units other than those of subheading 8471 41 and 8471 49, whether or not in the same housing one or two of the following types of units : storage units, input units, output units

 

8471

60

Input or output units, whether or not containing storage units in the same housing

 

8471

70

Storage units, including central storage units, optical disk storage units, hard disk drives and magnetic tape storage units

 

8471

80

Other units of automatic data processing machines

 

8471

90

Other

ex

8472

90

Automatic teller machines

 

8473

21

Parts and accessories of the machines of heading No 8470 of the electronic calculating machines of subheading 8470 10, 8470 21 and 8470 29

 

8473

29

Parts and accessories of the machines of heading No 8470 other than the electronic calculating machines of subheading 8470 10, 8470 21 and 8470 29

 

8473

30

Parts and accessories of the machines of heading No 8471

 

8473

50

Parts and accessories equally suitable for use with machines of two or more of the headings Nos. 8469 to 8472

ex

8504

40

Static converters for automatic data processing machines and units thereof, and telecommunication apparatus

ex

8504

50

Other inductors for power supplies for automatic data processing machines and units thereof, and telecommunication apparatus

 

8517

 

Electrical apparatus for line telephony or line telegraphy, including line telephone sets with cordless handsets and telecommunication apparatus for carrier-current line systems or for digital line systems; videophones:

 

8517

11

Line telephone sets with cordless handsets

 

8517

19

Other telephone sets and videophones

 

8517

21

Facsimile machines

 

8517

22

Teleprinters

 

8517

30

Telephonic or telegraphic switching apparatus

 

8517

50

Other apparatus, for carrier-current line systems or for digital line systems

 

8517

80

Other apparatus including entry-phone systems

 

8517

90

Parts of apparatus of heading 8517

ex

8518

10

Microphones having a frequency range of 300 Hz to 3,4 KHz with a diameter of not exceeding 10 mm and a height not exceeding 3 mm, for telecommunication use

ex

8518

30

Line telephone handsets

ex

8518

29

Loudspeakers, without housing, having a frequency range of 300 Hz to 3,4 KHz with a diameter of not exceeding 50 mm, for telecommunication use

 

8520

20

Telephone answering machines

 

8523

11

Magnetic tapes of a width not exceeding 4 mm

 

8523

12

Magnetic tapes of a width exceeding 4 mm but not exceeding 6,5 mm

 

8523

13

Magnetic tapes of a width exceeding 6,5 mm

 

8523

20

Magnetic discs

 

8523

90

Other

 

8524

31

Discs for laser reading systems for reproducing phenomena other than sound or image

ex

8524

39

Other :

- for reproducing representations of instructions, data, sound, and image, recorded in a machine readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine

 

8524

40

Magnetic tapes for reproducing phenomena other than sound or image

 

8524

91

Media for reproducing phenomena other than sound or image

ex

8424

99

Other :

- for reproducing representations of instructions, data, sound, and image, recorded in a machine readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine

ex

8525

10

Transmission apparatus other than apparatus for radio-broadcasting or television

 

8525

20

Transmission apparatus incorporating reception apparatus

ex

8525

40

Digital still image video cameras

ex

8527

90

Portable receivers for calling, alerting or paging

ex

8529

10

Aerials or antennae of a kind used with apparatus for radio-telephony and radio-telegraphy

ex

8529

90

Parts of:

transmission apparatus other than apparatus for radio-broadcasting or television

transmission apparatus incorporating reception apparatus

digital still image video cameras,

portable receivers for calling, alerting or paging

 

8531

20

Indicator panels incorporating liquid crystal devices (LCD) or light emitting diodes (LED)

ex

8531

90

Parts of apparatus of subheading 8531 20

 

8532

 

Electrical capacitors, fixed, variable or adjustable (pre-set):

 

8532

10

Fixed capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0,5 kvar (power capacitors)

 

8532

21

Tantalum fixed capacitors

 

8532

22

Aluminium electrolytic fixed capacitors

 

8532

23

Ceramic dielectric, single layer fixed capacitors

 

8532

24

Ceramic dielectric, multilayer fixed capacitors

 

8532

25

Dielectric fixed capacitors of paper or plastics

 

8532

29

Other fixed capacitors

 

8532

30

Variable or adjustable (pre-set) capacitors

 

8532

90

Parts

 

8533

 

Electrical resistors (including rheostats and potentiometers), other than heating resistors:

 

8533

10

Fixed carbon resistors, composition or film types

 

8533

21

Other fixed resistors for a power handling capacity not exceeding 20 W

 

8533

29

Other fixed resistors for a power handling capacity of 20 W or more

 

8533

31

Wirewound variable resistors, including rheostats and potentiometers, for a power handling capacity not exceeding 20 W

 

8533

39

Wirewound variable resistors, including rheostats and potentiometers, for a power handling capacity of 20 W or more

 

8533

40

Other variable resistors, including rheostats and potentiometers

 

8533

90

Parts

 

8534

 

Printed circuits

ex

8536

50

Electronic AC switches consisting of optically coupled input and output circuits (Insulated thyristor AC switches)

ex

8536

50

Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology) for a voltage not exceeding 1000 volts

ex

8536

50

Electromechanical snap-action switches for a current not exceeding 11 amps

ex

8536

69

Plugs and sockets for co-axial cables and printed circuits

ex

8536

90

Connection and contact elements for wires and cables

 

8541

 

Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes; mounted piezo-electric crystals:

 

8541

10

Diodes, other than photosensitive or light-emitting diodes

 

8541

21

Transistors, other than photosensitive transistors, with a dissipation rate of less than 1 W

 

8541

29

Transistors, other than photosensitive transistors, with a dissipation rate of 1 W or more

 

8541

30

Thyristors, diacs and triacs, other than photosensitive devices

 

8541

40

Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light emitting diodes

 

8541

50

Other semiconductor devices

 

8541

60

Mounted piezo-electric crystals

 

8541

90

Parts

 

8542

 

Electronic integrated circuits and microassemblies

 

8542

12

Cards incorporating an electronic integrated circuit ('smart' cards)

 

8542

13

Metal oxide semiconductors (MOS technology)

 

8542

14

Circuits obtained by bipolar technology

 

8542

19

Other monolithic digital integrated circuits, including circuits obtained by a combination of bipolar and MOS technologies (BIMOS technology)

 

8542

30

Other monolithic integrated circuits

 

8542

40

Hybrid integrated circuits

 

8542

50

Electronic microassemblies

 

8542

90

Part

 

8543

81

Proximity cards and tags

ex

8543

89

Electrical machines with translation or dictionary functions

ex

8544

41

Other electric conductors, for a voltage not exceeding 80 V, fitted with connectors, of a kind used for telecommunications

ex

8544

49

Other electric conductors, for a voltage not exceeding 80 V, not fitted with connectors, of a kind used for telecommunications

ex

8544

51

Other electric conductors, for a voltage exceeding 80 V but not exceeding 1000 V, fitted with connectors, of a kind used for telecommunications

 

8544

70

Optical fibre cables

 

9009

11

Electrostatic photocopying apparatus, operating by reproducing the original image directly onto the copy (direct process)]

 

9009

21

Other photocopying apparatus, incorporating an optical system

 

9009

90

Parts and accessories

 

9026

 

Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading No 9014, 9015, 9028 or 9032:

 

9026

10

Instruments for measuring or checking the flow or level of liquids

 

9026

20

Instruments and apparatus for measuring or checking pressure

 

9026

80

Other instruments and apparatus for measuring or checking of heading 9026

 

9026

90

Parts and accessories of instruments and apparatus of heading 9026

 

9027

20

Chromatographs and electrophoresis instruments

 

9027

30

Spectrometers, spectrophotometers and spectrographs using optical radiations (UV, visible, IR)

 

9027

50

Other instruments and apparatus using optical radiations (UV, visible, IR) of heading No 9027

 

9027

80

Other instruments and apparatus of heading No 9027 (other than those of heading No 9027 10)

ex

9027

90

Parts and accessories of products of heading 9027, other than for gas or smoke analysis apparatus and microtomes

 

9030

40

Instruments and apparatus for measuring and checking, specially designed for telecommunications (for example, cross-talk meters, gain measuring instruments, distorsion factor meters, psophometers)

Attachment A, Section 2

Semiconductor manufacturing and testing equipment and parts thereof

 

HS Code

Description

Comments

ex

7017 10

Quartz reactor tubes and holders designed for insertion into diffusion and oxidation furnaces for production of semiconductor wafers

For Attachment B

ex

8419 89

Chemical vapor deposition apparatus for semiconductor production

For Attachment B

ex

8419 90

Parts of chemical vapor deposition apparatus for semiconductor production

For Attachment B

ex

8421 19

Spin dryers for semiconductor wafer processing

 

ex

8421 91

Parts of spin dryers for semiconductor wafer processing

 

ex

8424 89

Deflash machines for cleaning and removing contaminants from the metal leads of semiconductor packages prior to the electroplating process

 

ex

8424 89

Spraying appliances for etching, stripping or cleaning semiconductor wafers

 

ex

8424 90

Parts of spraying appliances for etching, stripping or cleaning semiconductor wafers

 

ex

8456 10

Machines for working any material by removal of material, by laser or other light or photo beam in the production of semiconductor wafers

 

ex

8456 91

Apparatus for stripping or cleaning semiconductor wafers

For Attachment B

 

8456 91

Machines for dry-etching patterns on semiconductor materials

 

ex

8456 99

Focused ion beam milling machines to produce or repair masks and reticles for patterns on semiconductor devices

 

ex

8456 99

Lasercutters for cutting contacting tracks in semiconductor production by laser beam

For Attachment B

ex

8464 10

Machines for sawing monocrystal semiconductor boules into slices, or wafers into chips

For Attachment B

ex

8464 20

Grinding, polishing and lapping machines for processing of semiconductor wafers

 

ex

8464 90

Dicing machines for scribing or scoring semiconductor wafers

 

ex

8466 91

Parts for machines for sawing monocrystal semiconductor boules into slices, or wafers into chips

For Attachment B

ex

8466 91

Parts of dicing machines for scribing or scoring semiconductor wafers

For Attachment B

ex

8466 91

Parts of grinding, polishing and lapping machines for processing of semiconductor wafers

 

ex

8466 93

Parts of focused ion beam milling machines to produce or repair masks and reticles for patterns on semiconductor devices

 

ex

8466 93

Parts of lasercutters for cutting contacting tracks in semiconductor production by laser beam

For Attachment B

ex

8466 93

Parts of machines for working any material by removal of material, by laser or other light or photo beam in the production of semiconductor wafers

 

ex

8456 93

Parts of apparatus for stripping or cleaning semiconductor wafers

For Attachment B

ex

8466 93

Parts of machines for dry-etching patterns on semiconductor materials

 

ex

8477 10

Encapsulation equipment for assembly of semiconductors

For Attachment B

ex

8477 90

Parts of encapsulation equipment

For Attachment B

ex

8479 50

Automated machines for transport, handling and storage of semiconductor wafers, wafer cassettes, wafer boxes and other material for semiconductor devices

For Attachment B

ex

8479 89

Apparatus for growing or pulling monocrystal semiconductor boules

 

ex

8479 89

Apparatus for physical deposition by sputtering on semiconductor wafers

For Attachment B

ex

8479 89

Apparatus for wet etching, developing, stripping or cleaning semiconductor wafers and flat panel displays

For Attachment B

ex

8479 89

Die attach apparatus, tape automated bonders, and wire bonders for assembly of semiconductors

For Attachment B

ex

8479 89

Encapsulation equipment for assembly of semiconductors

For Attachment B

ex

8479 89

Epitaxial deposition machines for semiconductor wafers

 

ex

8479 89

Machines for bending, folding and straightening semiconductor leads

For Attachment B

ex

8479 89

Physical deposition apparatus for for semiconductor production

For Attachment B

ex

8479 89

Spinners for coating photographic emulsions on semiconductor wafers

For Attachment B

ex

8479 90

Part of apparatus for physical deposition by sputtering on semiconductor wafers

For Attachment B

ex

8479 90

Parts for die attach apparatus, tape automated bonders, and wire bonders for assembly of semiconductors

For Attachment B

ex

8479 90

Parts for spinners for coating photographic emulsions on semiconductor wafers

For Attachment B

ex

8479 90

Parts of apparatus for growing or pulling monocrystal semiconductor boules

 

ex

8479 90

Parts of apparatus for wet etching, developing, stripping or cleaning semiconductor wafers and flat panel displays

For Attachment B

ex

8479 90

Parts of automated machines for transport, handling and storage of semiconductor wafers, wafer cassettes, wafer boxes and other material for semiconductor devices

For Attachment B

ex

8479 90

Parts of encapsulation equipment for assembly of semiconductors

For Attachment B

ex

8479 90

Parts of epitaxial deposition machines for semiconductor wafers

 

ex

8479 90

Parts of machines for bending, folding and straightening semiconductor leads

For Attachment B

ex

8479 90

Parts of physical deposition apparatus for for semiconductor production

For Attachment B

ex

8480 71

Injection and compression moulds for the manufacture of semiconductor devices

 

ex

8514 10

Resistance heated furnaces and ovens for the manufacture of semiconductor devices on semiconductor wafers

 

ex

8514 20

Inductance or dielectric furnaces and ovens for the manufacture of semiconductor devices on semiconductors wafers

 

ex

8514 30

Apparatus for rapid heating of semiconductor wafers

For Attachment B

ex

8514 30

Parts of resistance heated furnaces and ovens for the manufacture of semiconductor devices on semiconductor wafers

 

ex

8514 90

Parts of apparatus for rapid heating of wafers

For Attachment B

ex

8514 90

Parts of furnaces and ovens of Headings No 8514 10 to No 8514 30

 

ex

8536 90

Wafer probers

For Attachment B

 

8543 11

Ion implanters for doping semiconductor materials

 

ex

8543 30

Apparatus for wet etching, developing, stripping or cleaning semiconductor wafers and flat panel displays

For Attachment B

ex

8543 90

Parts of apparatus for wet etching, developing, stripping or cleaning semiconductor wafers and flat panel displays

For Attachment B

ex

8543 90

Parts of ion implanters for doping semiconductor materials

 

 

9010 41 to 9010 49

Apparatus for projection, drawing or plating circuit patterns on sensitized semiconductor materials and flat panel displays

 

ex

9010 90

Parts and accessories of the apparatus of Headings No 9010 41 to 9010 49

 

ex

9011 10

Optical stereoscopic microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9011 20

Photomicrographic microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9011 90

Parts and accessories of optical stereoscopic microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9011 90

Parts and accessories of photomicrographic microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9012 10

Electron beam microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9012 90

Parts and accessories of electron beam microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles

For Attachment B

ex

9017 20

Pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates

For Attachment B

ex

9017 90

Parts and accessories for pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates

For Attachment B

ex

9017 90

Parts of such pattern generating apparatus

For Attachment B

 

9030 82

Instruments and apparatus for measuring or checking semiconductor wafers or devices

 

ex

9030 90

Parts and accessories of instruments and apparatus for measuring or checking semiconductor wafers or devices

 

ex

9030 90

Parts of instruments and appliances for measuring or checking semiconductor wafers or devices

 

 

9031 41

Optical instruments and appliances for inspecting semiconductor wafers or devices or for inspecting masks, photomasks or reticles used in manufacturing semiconductor devices

 

ex

9031 49

Optical instruments and appliances for measuring surface particulate contamination on semiconductor wafers

 

ex

9031 90

Parts and accessories of optical instruments and appliances for inspecting semiconductor wafers or devices or for inspecting masks, photomasks or reticles used in manufacturing semiconductor devices

 

ex

9031 90

Parts and accessories of optical instruments and appliances for measuring surface particulate contamination on semiconductor wafers

 

Attachment B

Positive list of specific products to be covered by this agreement wherever they are classified in the HS.

Where parts are specified, they are to be covered in accordance with HS Notes 2(b) to Section XVI and Chapter 90, respectively.

Computers: automatic data processing machines capable of 1) storing the processing program or programs and at least the data immediately necessary for the execution of the program; 2) being freely programmed in accordance with the requirements of the user; 3) performing arithmetical computations specified by the user; and 4) executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run.

The agreement covers such automatic data processing machines whether or not they are able to receive and process with the assistance of central processing unit telephony signals, television signals, or other analogue or digitally processed audio or video signals. Machines performing a specific function other than data processing, or incorporating or working in conjunction with an automatic data processing machine, and not otherwise specified under Attachment A or B, are not covered by this agreement.

Electric amplifiers when used as repeaters in line telephony products falling within this agreement, and parts thereof

Flat panel displays (including LCD, Electro Luminescence, Plasma and other technologies) for products falling within this agreement, and parts thereof.

Network equipment: Local Area Network (LAN) and Wide Area Network (WAN) apparatus, including those products dedicated for use solely or principally to permit the interconnection of automatic data processing machines and units thereof for a network that is used primarily for the sharing of resources such as central processor units, data storage devices and input or output units - including adapters, hubs, in-line repeaters, converters, concentrators, bridges and routers, and printed circuit assemblies for physical incorporation into automatic data processing machines and units thereof.

Monitors : display units of automatic data processing machines with a cathode ray tube with a dot screen pitch smaller than 0,4 mm not capable of receiving and processing television signals or other analogue or digitally processed audio or video signals without assistance of a central processing unit of a computer as defined in this agreement.

The agreement does not, therefore, cover televisions, including high definition televisions.

Optical disc storage units, for automatic data processing machines (including CD drives and DVD-drives), whether or not having the capability of writing/recording as well as reading, whether or not in their own housings.

Paging alert devices , and parts thereof .

Plotters whether input or output units of HS heading No 8471 or drawing or drafting machines of HS heading No 9017.

Printed Circuit Assemblies for products falling within this agreement, including such assemblies for external connections such as cards that conform to the PCMCIA standard.

Such printed circuit assemblies consist of one or more printed circuits of heading 8534 with one or more active elements assembled thereon, with or without passive elements "Active elements" means diodes, transistors, and similar semiconductor devices, whether or not photosensitive, of heading 8541, and integrated circuits and micro assemblies of heading 8542.

Projection type flat panel display units used with automatic data processing machines which can display digital information generated by the central processing unit.

Proprietary format storage devices including media therefor for automatic data processing machines, with or without removable media and whether magnetic, optical or other technology, including Bernoulli Box, Syquest, or Zipdrive cartridge storage units.

Multimedia upgrade kits for automatic data processing machines, and units thereof, put up for retail sale, consisting of, at least, speakers and/or microphones as well as a printed circuit assembly that enables the ADP machines and units thereof to process audio signals (sound cards).

Set top boxes which have a communication function : a microprocessor-based device incorporating a modem for gaining access to the Internet, and having a function of interactive information exchange


TANC offers these agreements electronically as a public service for general reference. Every effort has been made to ensure that the text presented is complete and accurate. However, copies needed for legal purposes should be obtained from official archives maintained by the appropriate agency.